Happy Everything!

Well, it's a little late to be saying Happy New Year seeing as we're well into February already.
And we won't mention about the 6 months plus since my last post except for me to say Thank you to my readers for still subscribing to my blog and not culling me from your blog lists when decluttering (Wasn't that everyone's New Year's Resolution?)

After finishing my Cert 2 at Tafe, I was keen to continue on creating at home but last year it just fell by the wayside. My inspiration abandoned me and I was busy at work and at home so it just didn't happen.

Two recent events have changed that! First my husband bought me a great Christmas present (yes, he's a keeper!) - it was a total surprise, and a much appreciated gift - Here it is:

It was hiding in the shed for 2 months. Even though I do go in the shed quite often I never even noticed it hidden down the back among the neglected camping gear! Just goes to show how cluttered the shed was! What a fabulous surprise -  I cried when he took me out to the back garden Christmas morning and it was sitting there with it's big Christmas ribbon around it.  (Ha Ha - tears of joy!!)   No longer do I have to attach my small vice and Bench peg to the Meals Area Table. I now have my own dedicated jewellery bench to hammer, saw and drill and solder. We had to do some rearranging of the spare room and I need to get another power point put in but other than that it's working really well.....and we can use the Meals Area Table for ......well, our meals!

The second event is that I enrolled in another course. Two former Tafe Lecturers have opened up a metal studio. They are running courses, renting out bench space, opening up gallery space, loaning out metalwork books library style  - everything!
I enrolled in the 6 week enamel class which was their very first class. There's so much about this that is good: they are awesome teachers and have created an informal, friendly, practical, well equipped, safe place for us to learn.  Perth people check out the link  - Contemporary Metal Students are very spoilt.

We are covering experimental enamelling techniques in this course, rather than the traditional techniques such as Cloisonne. This suits me as I don't really have the patience for that sort of work. We've covered techniques using Liquid enamels, Sifting, Stencilling, Stamping, decals, & Sgraffito. Pretty much anything we can think of - we're encouraged to try. Some of things the other students have tried were impressing glass beads and fusing them to the work, and impressing ferns & material into the enamel before firing We're churning out lots of sample pieces and having lots of fun. I've made some cool pieces (and a couple of ugly pieces which I'm not showing!) but I'm learning so much and I'm looking forward to firing up the kiln at home when classes are over and playing with it all some more.
 Some of my favourite experiments were with stencilling.

T

The samples above were made by sifting the powdered enamel through thin acetate stencils. The exception is the bottom left sample where the enamel was sifted directly through a piece of lace ribbon. If you're interested there's more on the stencils and how I made them over on my other Craft blog.

Pin It

Just 4 kids

My husband won a holiday! We were pretty excited. I had visions of sipping cocktails around a pool with the palm trees rustling in the gentle breeze.
Those thoughts soon turned to "How the hell am I going to get up off an airmattress every morning with my dodgy knee" LOL - the holiday we won was a "Tag a long" 4 wheel drive camping adventure holiday.

No matter :) we are off to Far North Queensland in July to discover Cape York Peninsular and will venture as far as the most northern point of the Australian mainland. It's something I think we wouldn't have ventured out to do alone, travelling over rough roads and tracks in this remote area, so this type of tour and travelling in a convoy is an opportunity too good to miss.

The tour organisers have an agenda other than making holidays happen, they raise money for Aussie Kids..... and along the way during the tour they present cheques from their fundraising efforts to the communities in the local areas.
As part of this trip we'll be involved in the fundraising efforts too, so I'm kicking off my fundraising by making jewellery to sell so I can donate the proceeds.
I've just listed this little Sterling Silver Crossed Heart Pendant in my Made it shop. I'm donating the materials, listing fees, time, etc etc, so that 100% of the purchase price can be donated to the Just 4 Kids Childrens Charity. 

Hope it sells quickly so I can make some more - I've got the bucket below to fill with money!

Buy the necklace here within Australia....or here If outside of Australia

 More about the charity 

Where we're going...

Pin It

Irregular Pendant

I've been meaning to make a silver version of the chunky copper pendant from my last post and I finally had a chance to do it.
This time I've used Sterling Silver Wire and it's on a smaller scale - The largest link is around 5cm x 3.5cm at it's widest points. (2 inches x 1 1.2 inches) Still, thats a pretty decent size for a silver pendant.

I like that you can rotate the shapes around in the jump ring bail to give it a different look. The top pic shows it in a uniform order then underneath it's pictured in a more haphazard arrangement.

 

My current quest is to create from the supplies I already have rather than buy in more materials. I've plenty of this Sterling Wire, so I can see some more of these coming on, maybe even earrings too!


Pin It

Get Coppered?

No it doesn't have the same ring to it as "Get Silvered" does it? But lately I've been playing around a bit with copper and Brass.  What about "Brassed off"? Lol - no I think I'll stick with Get Silvered.

M. came in from the shed the other day and gave me a stack of nice thick copper wire. Each wire almost 3mm thick in 30cm lengths! Score! He salvaged it from work - it was a sample piece of Industrial cable that was going to be chucked out! There I was, thinking he was hiding in the shed playing with his fishing lures and reels when all the time he was stripping wire for me :)

We've had days and days of heatwaves lately with temperatures in the high 30s and even getting as high as 42 degrees (that's 107.6 degrees farenheit for the Celsius challenged!) Obviously, that's not the weather for soldering in a tin shed, especially when there are total fire bans.  So I waited patiently and courtesy of Cyclone Iggy out to sea further north we've had rain and even cloud cover and cooler temps in the last day or two. Of course I seized the opportunity to light up the torch -Here's the before and after shots. It's nice and chunky - The largest shape is around 8 x 4cm.

Pin It

Tiny Treasure Pendant

Before:

After:

This pendant was inspired by those gorgeous cylinder shaped Bali Silver Prayer Boxes. I've admired them for a long time.
For my pendant I used some copper pipe from the Hardware store, and used the same techniques that I used with my trinket boxes. I've plenty of spare pipe leftover - it was a 1.5 metre length and the pendant is only about 4 cm long. Overkill?? HaHa maybe! Anyway, I hope to experiment some more with the leftovers! I may try etching the next one, and I want to try out some kind of safety catch...and... if I get really adventurous I may try out a hinged version and....Oh well .....we'll see how I go.........     :) Pin It

Halfway There!

Week 20 Tafe:

I can't believe we are halfway through the year and the first semester is over already at TAFE. This week we were free to finish things off or do our own projects.

I did an anticlastic bangle. I don't have the right stakes or the right hammers to do this at home but wanted to have a go. It involved lots of  noise & hammering for most of the day and I went home with an aching arm....but I also went home with this - a  brass cuff. It's about 3.5 cm wide.The colour is from the constant annealing but I rather liked it so I just sanded and buffed up the edges for contrast and I'll just leave the oxidisation.

Towards the end of the day I made this open brass bangle. This was quick and simple as I cut it out with the guillotine. Now that would be a luxury to have one at home *dream*, then I drilled the holes quickly with the flex shaft. I got to use an oval steel mandrel which was a change  - at home I just have a very basic round wooden mandrel.

Now - 3 weeks break before the second semester. Hope to get a little bench time at home while we're on break. Pin It

Brassed Off!

Week 17 TAFE:

No photos - Suffice to say, all was going well with setting the CZ in the claw setting, until the end of the day when doing the final clean up....the bail parted company with the setting....what can I say?....I did a shoddy soldering job!  :(  Hopefully I'll be able to re solder carefully to fix it.....we'll see.......to be continued.

Moving on....at home this week I made some oversized earrings from huge brass discs on Sterling Ear wires. They're 5cm (2 inches) in diameter but they're not too heavy to wear as they're in a thinner gauge of metal. I had fun texturing the metal.

'Landscape' Convex discs - Roll printed with Aluminum mesh.

'Portrait' Convex' Discs - Roll printed with textured paper.

'Portrait' Concave Discs. Hammered Finish.

Pin It

Progress report on the clasp from hell.... ;)

Week 13 & 14 at TAFE:

Both TAFE days I've been working on the padlock clasp which is proving to be a challenge. I did some work at home on the weekend and soldered the chain links of the bracelet, and while I was at it, I thought I'd just solder the top plate to the base of the padlock clasp while I was at the bench: easy peasy - a five minute job...after all it's just a variation of a hollow form and I've churned a couple out with not too many issues since I learnt the technique ......Aha! - what naive optimism - It was actually A PITA that took 4 attempts!

The top is very gently domed and there was one little section where the top just wouldn't solder to the wall of the piece, although when it was all bound up pre soldering it looked like it was all flush and connected OK. Despite me trying the troubleshooting tips from the teacher(filing & gentle hammering of the edges) I still had a tiny hairline section that just wouldn't connect!

Stick soldering saved the day - something I don't usually do because I'm not too good at this and I find that I flood too much solder on the piece when I solder this way. Anyway this time that was a good thing (yay!) and it filled the 'gap'! Now there's just this small matter of extensive firescale to address LOL!
Many jewellers will tell you that solder will not fill a gap. Bearing this in mind it's quite possible that my problem wasn't so much a gap. It may have been that the section was dirty or perhaps contaminated by pickle, which prevented the solder from flowing in that spot. Who knows? Anyway it's all fixed now!

In class I prepared the arm which I soldered on to a little hand formed tube, it had to be hardened, filed, annealed and turned up and soldered. I had to "fit" it to the body, working out the placement of the holes in the wall,which I drilled, burred & filed out ready to take the arm and be riveted in place......which is what I'll be doing next week in class!

Pin It

Silver owl.

At the beginning of the month I made a copper and silver owl pendant, and I promised myself I'd make another using just Sterling Silver.
Here he is in his Rosemary Bush "tree".........

Pin It

Mixed Metal Challenge

In the Metalwork Section at the Beading Forum  we've just had a mixed metal challenge.

I spent a month procrastinating about a design and finally on the second last day, I posted in the forum that I was dropping out of the challenge because I'd run out of time. Hmmm...weird, but dropping out took the pressure off me (as it does!) and kick started me into action with a brand new idea! 
I finished this little fella that evening (within the deadline!) and I'm really chuffed with the result - the sawing, filing and soldering exercises we're doing at my TAFE course have given me a bit more confidence and all the steps went smoothly :)

Oh and here's my inspiration for this little fella. A greeting card that I bought for an friend's birthday last week. Cute huh?

My next task - I'm going to make a slightly smaller all Sterling version....stay tuned :) Pin It

A time for reflection - where the heck did 2010 go??

As 2010 comes to an end and I reflect on the year - all I can think of is - heck - that went fast!   It may have dragged for others but I'll bet they are young - Pretty much  for anyone my age ( I'll be coy!) I expect that it flew by!
Creatively 2010 has been a 'so so' year for me.  I've had many great ideas for designs but in reality many pieces have bombed - Firescale - how I hate thee! I've unintentionally melted a few great ideas and I somehow wonder how I managed to solder anything successfully sometimes.  My enameling has been a bit hit and miss but I loved the class I took earlier this year and am looking forward to experimenting more with powdered glass!

On a positive note, I redid my button pendant in 2 sizes. It's evolved very subtlety - but I think they work as well as the original which is currently with my daughter on her backpacking adventures around Europe and the UK and is apparently collecting the occasional compliment when she wears it. .

I was chuffed when, after sending some work to my retail stockist the other week  that  these pieces and another piece sold immediately :)  So, all in all maybe 2010 wasn't too bad after all :)

Anyway, I've decided that for 2011 that I'm going back to basics. I'm going to revisit the techniques I learned as a beginner - piercing, hammering, riveting and yes even soldering, maybe re do a few pieces that were successful, maybe reinvent them a little, but generally hone in on technique. I might even do a few step by step projects from the magazines I subscribe to consolidate the re learning process.

And to finish off the year creatively I made these two pendants. The simple clean lines that I love - no soldering just simple metal forming. I was playing around  to see if I could make a mobius ring  inspired by my friend Annie's love of all things mobius. The ring bit didn't work for me but I loved twisting the metal and these were the happy result.

I'm feeling very positive about it all.........Roll on 2011 ...Happy New Year to you all........ Pin It

When good rings go bad.....

I like to make rings but getting the sizing right seems to be a hit & miss affair most of the time. Occasionally I manage to finish one that actually fits me!
When I started this one, the three wires were to form the ring shape and pass over each other at the top in the same way as when you first link your fingers if you're going to pray.........Did you just try that?
That idea came to an abrupt halt when I was joining the wires at the base of the ring and the solder ran all along the seam lines and joined the wires together at the point where they should have been separate and intersecting. Darn!
After playing with the pliers I formed the ends into little scroll shapes instead and salvaged my disaster.
The ring reminds me of a water spout but I'll call it my "fountain" ring 'because that sounds so much more elegant. And it fits me - Yay! Pin It